Window tinting film is typically applied to car windows. It limits the amount of sunlight that reaches the inside of the car and also provides some privacy. The film is often applied by the car or window manufacturer, or a company that specializes in tinting. If you want to remove the tint — perhaps because it has air bubbles or is peeling — do so cautiously. Removing the film in its entirety also involves removing all the adhesive. A solvent, such as paint thinner, can help, but several preliminary steps are required before you need the solvent.
Tint is commonly applied to car windows. Image Credit: Hemera Technologies/AbleStock.com/Getty Images
Things You’ll Need
-
Razor Blade
-
Plastic Bag
-
Nylon Scrubbing Pad
-
Window Cleaner
-
Rag
-
Paint Thinner
-
Soapy Water
Step 1
Remove the tinting film from the window per manufacturer directions. One way to remove it is to spray the side with tint with a window cleaner containing ammonia. Then, cover it with a plastic trash bag or dry cleaning bag. This only works if the window is in the sun. Wait at least 45 minutes, peel off the bag to remove the tint. If necessary, reapply the window cleaner and another plastic bag to remove more of the tint.
Step 2
Scrape off the remaining film carefully with a razor blade. If you are removing the tint on the back window of a car, do not remove the defrost lines, if applicable, with the razor blade.
Step 3
Scrub the window with soapy water. Use a nylon scrubbing pad, testing it first in an inconspicuous area to be sure it does not scratch the glass. Otherwise, use an absorbent rag, such as terrycloth.
Step 4
Moisten a rag with paint thinner and scrub the window to remove the remaining tint film glue. Continue until the window is no longer sticky. Concentrate around the edges and corners. If you are going to have the window re-tinted, you must remove all the adhesive first.
